Automated eBus for Munich: ADASTEC, MAN and MVG Bring Automated Driving to Urban Public Transport

The MAN Lion’s City 12 E, automated by ADASTEC, has officially entered public-road testing on Munich’s Route 178 as part of the MINGA project. This milestone follows successful testing, TÜV technical inspections, and KBA operating approval under the AFGBV.

MAN Lion’s City 12 E Automated by ADASTEC Begins Public-Road Testing in Munich

Following successful testing and the completion of the required regulatory procedures, including the required technical inspections by TÜV and the operating permit granted by the federal authority for road traffic Kraftfahrt-Bundesamt (KBA) under the AFGBV, the MAN Lion’s City 12 E automated by ADASTEC has entered public-road testing on Munich’s Route 178 as part of the MINGA project.

ADASTEC Corp., a leading software company specializing in SAE Level-4 automated driving solutions for public transit buses and commercial vehicles, and MAN Truck & Bus have reached a major milestone in their collaboration as the MAN Lion’s City 12 E, automated by ADASTEC, begins testing in real urban traffic in Munich.

Since the beginning of September, the 12-meter MAN Lion’s City 12 E, automated by ADASTEC, has been operating for the first time on Route 178 between Petuelring and Freimanner Hölzl. Following extensive testing at MAN’s facilities and the completion of the required technical inspections and regulatory procedures, the automated city bus is now being tested in real urban traffic on public roads in Munich.

The move from a controlled testing environment to Munich’s active road network marks a significant step toward validating automated bus operations under real-world public transport conditions.

“Reaching Munich's public roads is a major milestone for ADASTEC and for automated public transport in Germany. After deploying our technology across 34 cities, we've learned that the real test is always performance in live, complex traffic, not in a controlled environment. What we're building with MAN and MVG under MINGA shows a clear path from engineering and validation to real-world operation, and a model for how automated buses can become a routine part of city mobility,” said Dr. Ali Peker, CEO of ADASTEC.

Moving from Controlled Testing to Real Urban Traffic

Route 178 provides a varied environment for testing automated operation, including main traffic arteries, 30 km/h zones, parking areas and underpasses. These conditions allow the project partners to evaluate the automated bus across scenarios representative of Munich’s wider public transport network.

Christian Hirte, Parliamentary State Secretary to the German Federal Minister of Transport: “Autonomous mobility will be part of our transportation system of the future. It is crucial that we test it under real-world conditions and gain experience for its practical application. With the start of the next test phase, an autonomous solo bus will be operating on public roads in Munich for the first time. The MINGA project is thus reaching another milestone and demonstrating how autonomous vehicles can meaningfully complement public transportation in the future and make it more flexible. We are supporting this development with approximately 13 million euros.”

During the current test phase, extensive route data is being collected to support automated operation on Route 178. The MAN Lion’s City 12 E automated by ADASTEC is operating in Munich’s urban traffic as the project progresses toward its next operational phase.

Barbaros Oktay, Head of Bus at MAN Truck & Bus, said: “With the first test runs on the route, we’ve left the controlled environment of our factory grounds and are bringing our system into real city traffic. This is an enormously important step toward automated urban mobility.”

For MVG, operating under realistic conditions is also a key part of understanding how automated buses can eventually be integrated into everyday public transport.

Sinaida Cordes, Authorised Signatory at SWM and MVG, commented: “The insights from the MINGA project are of great importance to MVG as a public transport operator. They help us better understand the possible applications of autonomous buses in public transport and assess their potential for passengers and operations. In the long term, we see autonomous vehicles as an opportunity to make public transport even more attractive, flexible, and efficient, thereby making an important contribution to the mobility of the future.”

Digitalizing Route 178 for Automated Operation

The current public-road testing phase includes the collection of detailed route data required for automated operation on Route 178. The MAN Lion’s City 12 E is equipped with five LiDAR sensors, six radars, eight cameras and satellite-based positioning, providing comprehensive perception of the vehicle’s surroundings as it travels through Munich’s urban environment. ADASTEC processes the collected route data to create the high-resolution digital map used by its automated driving system. Combined with ADASTEC’s flowride.ai platform and real-time sensor data, the system enables precise localization, perception, driving behavior planning and vehicle control for automated operation in complex urban traffic.

Veit Bodenschatz, Head of the Bus Division at SWM and MVG, said: “Route 178 offers ideal conditions for test operations. It combines a variety of traffic situations, such as major thoroughfares, 30-km/h zones, parking areas, and underpasses. This means it is a good representation of Munich’s diverse bus network. For future regular service, it is crucial to conduct the tests as close to real-world conditions as possible”

KBA Operating Permit under AFGBV Marks a Key Regulatory Milestone

Before entering public-road testing, the MAN Lion’s City 12 E automated by ADASTEC successfully completed an extensive testing program on MAN’s premises. The program included electromagnetic compatibility testing and validation of the functions of ADASTEC’s automated driving system across a wide range of defined test scenarios, with particular attention given to ensuring that the safety driver on board can intervene at any time if required.

Based on these tests, the required technical inspections by TÜV and subsequent regulatory procedures were completed.

A central milestone was the operating permit granted by the federal authority for road traffic, Kraftfahrt-Bundesamt (KBA), in accordance with the German Autonomous Vehicles Approval and Operation Ordinance (AFGBV). The completion of the AFGBV process provides the regulatory basis for the public-road test operation now underway in Munich, enabling the project to move forward under Germany’s established framework for automated vehicle operation.

For ADASTEC, this regulatory milestone is particularly significant because scalable deployment of SAE Level-4 automated public transport requires vehicle technology, automated driving systems, operational processes and regulatory frameworks to progress together.

Preparing for the Next Phase in November

ADASTEC, MAN and MVG are expected to begin the next phase of automated test operation along Route 178 in November. The bus is planned to operate as an additional vehicle on the existing route, creating conditions that closely simulate future deployment in regular scheduled public transport.

During this phase, selected test users will be able to ride on the vehicle as part of a closed user group. The bus provides approximately 30 seats as well as space for a wheelchair or pram.

The transition to operation with selected test users will provide further insights into how automated buses can function within an existing public transport network and how the technology can be integrated into the operational processes of a public transport operator.

Atalay Taşkoparan, Chief Commercial Officer at ADASTEC, commented: “The combination of MAN’s vehicle engineering, ADASTEC’s SAE Level-4 automated driving technology, MVG’s operational expertise and Germany’s regulatory framework gives us the opportunity to address automated public transport as a complete system. Public-road operation under the AFGBV framework is an important step because scaling automated buses requires more than technology alone; it requires OEM integration, regulatory readiness and real operational experience to come together.”

‍

From Vehicle Integration to Real-World Automated Public Transport

The start of public-road testing represents the next stage of the ADASTEC and MAN collaboration: moving from vehicle integration and controlled validation into operation in a complex urban environment.

For ADASTEC, the MINGA deployment demonstrates the importance of combining a production city bus platform with a specialised SAE Level-4 automated driving system, strong OEM integration and a regulatory pathway designed for automated vehicles.

The experience gained on Route 178 will contribute to the continued development of the automated MAN Lion’s City 12 E and provide practical insights into the technical, regulatory and operational requirements of introducing automated buses into established public transport networks.

With the vehicle now operating on Munich’s public roads, ADASTEC and MAN are bringing automated bus technology into real urban operation, combining proven automated driving capabilities, vehicle integration and regulatory readiness to support scalable automated public transport.

About the MINGA research project

The MINGA research project (Munich’s Automated Local Transport with Ridepooling, Solobus, and Bus Platoons) has been underway since 2023 with a total of 16 partners from public authorities, research institutions, and industry. The Mobility Department of the city of Munich serves as the consortium leader and is responsible for the overall project. The goal is to integrate automated and connected mobility solutions into the existing transportation system and to address key questions regarding technology, regulation, cost-effectiveness, accessibility, and operations. The project is being funded with approximately 13 million euros through mid-2027 by the Federal Ministry of Transport (BMV) under the funding guideline “Autonomous and Connected Driving in Public Transportation.” Further information on the project can be found at mvg.de/minga and muenchenunterwegs.de/minga.

‍

‍